Just Bass OS by OscillatorSynk
Oscillator 1 timbre
Both sawtooth and square oscillators are enabled.
Pulse width of square oscillator is set to 70% (50% is perfectly square, 100% is very short pulsewave) and is modulated by LFO 2.
LFO 2 direct modulation amount for pulse width of square oscillator is 102.
Oscillator 2 timbre
Volume level for oscillator 2 is manually set to 86.
Tone for oscillator 2 is off.
Volume (VCA) volume
Amplification level is set to 6dB (255) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is off.
Oscillators ranges timbre
Oscillators 1 range is 16'.
Oscillators 2 range is 8'.
Noise timbre
Noise level is manually set to 70.
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 87.88Hz (24) and is modulated by Note Vel, VCF Env.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 197.
Low-pass filter envelope amount is modulated by Note Vel, Note Num.
Note Vel direct modulation amount for low-pass filter envelope amount is 255.
Note Num direct modulation amount for low-pass filter envelope amount is 118.
Filter resonance is set to 13 and is modulated by Mod Wheel.
Mod Wheel mod-matrix 1 modulation amount for filter resonance is 64.
Oscillator drift & unison detuning timbre
Unison detune level is off.
Oscillators drift level is manually set to 5. Drift rate is 0
Performance triggering timbre
Envelope triggering mode is set to re-trigger.
Portamento pitch
Portamento time is manually set to 45.
FX routing & levels fx
FX mode is set to Send, and routing is
Effect 1 level is off. Effect 2 level is off. Effect 3 level is off. Effect 4 level is off.
Mod Wheel modulator
Controls VCF Resonance.
| function | type | destination | amount |
|---|---|---|---|
| timbre | matrix | VCF Resonance | 64 |
Note Num modulator
Controls VCF Keyboard Tracking, All VCF Envelope Rates.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Keyboard Tracking | 118 |
| matrix | All VCF Envelope Rates | 0 |
Note Vel modulator
Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader-indirect | VCF Cut-off Frequency | 197 |
| menu | VCF Envelope Velocity Sensitivity | 255 |
LFO 2 modulator
Controls OSC 1 Pulse Width Modulation Depth.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | OSC 1 Pulse Width Modulation Depth | 102 |
| name | value |
|---|---|
| LFO 2 Rate | 1.32Hz (120) |
| LFO 2 Delay / Fade | 0s (0) |
| LFO 2 Shape | Triangle |
| LFO 2 Key Sync | off |
| LFO 2 Arp Sync | off |
| LFO 2 Mono Mode | 0 |
| LFO 2 Slew Rate | 0 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0s (0) |
| VCA Envelope Decay Time | 32s (255) |
| VCA Envelope Sustain Level | 100% (255) |
| VCA Envelope Release Time | 0.22s (37) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 128 |
| VCA Envelope Decay Curve | 0 |
| VCA Envelope Sustain Curve | 128 |
| VCA Envelope Attack Curve | 0 |
VCF Env modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 197 |
| name | value |
|---|---|
| VCF Envelope Attack Time | 0s (0) |
| VCF Envelope Decay Time | 1.16s (130) |
| VCF Envelope Sustain Level | 28% (72) |
| VCF Envelope Release Time | 0.72s (100) |
| VCF Envelope Trigger Mode | Key (0) |
| VCF Envelope Attack Curve | 128 |
| VCF Envelope Decay Curve | 0 |
| VCF Envelope Sustain Curve | 128 |
| VCF Envelope Attack Curve | 0 |